bbr mtproxy_go

bbr.sh

@@ -0,0 +1,344 @@
+#!/usr/bin/env bash
+#
+# Auto install latest kernel for TCP BBR
+#
+# System Required:  CentOS 6+, Debian7+, Ubuntu12+
+#
+# Copyright (C) 2016-2018 Teddysun <[email protected]>
+#
+# URL: https://teddysun.com/489.html
+#
+
+red='\033[0;31m'
+green='\033[0;32m'
+yellow='\033[0;33m'
+plain='\033[0m'
+
+cur_dir=$(pwd)
+
+[[ $EUID -ne 0 ]] && echo -e "${red}Error:${plain} This script must be run as root!" && exit 1
+
+[[ -d "/proc/vz" ]] && echo -e "${red}Error:${plain} Your VPS is based on OpenVZ, which is not supported." && exit 1
+
+if [ -f /etc/redhat-release ]; then
+    release="centos"
+elif cat /etc/issue | grep -Eqi "debian"; then
+    release="debian"
+elif cat /etc/issue | grep -Eqi "ubuntu"; then
+    release="ubuntu"
+elif cat /etc/issue | grep -Eqi "centos|red hat|redhat"; then
+    release="centos"
+elif cat /proc/version | grep -Eqi "debian"; then
+    release="debian"
+elif cat /proc/version | grep -Eqi "ubuntu"; then
+    release="ubuntu"
+elif cat /proc/version | grep -Eqi "centos|red hat|redhat"; then
+    release="centos"
+else
+    release=""
+fi
+
+is_digit(){
+    local input=${1}
+    if [[ "$input" =~ ^[0-9]+$ ]]; then
+        return 0
+    else
+        return 1
+    fi
+}
+
+get_valid_valname(){
+    local val=${1}
+    local new_val=$(eval echo $val | sed 's/[-.]/_/g')
+    echo ${new_val}
+}
+
+get_hint(){
+    local val=${1}
+    local new_val=$(get_valid_valname $val)
+    eval echo "\$hint_${new_val}"
+}
+
+#Display Memu
+display_menu(){
+    local soft=${1}
+    local default=${2}
+    eval local arr=(\${${soft}_arr[@]})
+    local default_prompt
+    if [[ "$default" != "" ]]; then
+        if [[ "$default" == "last" ]]; then
+            default=${#arr[@]}
+        fi
+        default_prompt="(default ${arr[$default-1]})"
+    fi
+    local pick
+    local hint
+    local vname
+    local prompt="which ${soft} you'd select ${default_prompt}: "
+
+    while :
+    do
+        echo -e "\n------------ ${soft} setting ------------\n"
+        for ((i=1;i<=${#arr[@]};i++ )); do
+            vname="$(get_valid_valname ${arr[$i-1]})"
+            hint="$(get_hint $vname)"
+            [[ "$hint" == "" ]] && hint="${arr[$i-1]}"
+            echo -e "${green}${i}${plain}) $hint"
+        done
+        echo
+        read -p "${prompt}" pick
+        if [[ "$pick" == "" && "$default" != "" ]]; then
+            pick=${default}
+            break
+        fi
+
+        if ! is_digit "$pick"; then
+            prompt="Input error, please input a number"
+            continue
+        fi
+
+        if [[ "$pick" -lt 1 || "$pick" -gt ${#arr[@]} ]]; then
+            prompt="Input error, please input a number between 1 and ${#arr[@]}: "
+            continue
+        fi
+
+        break
+    done
+
+    eval ${soft}=${arr[$pick-1]}
+    vname="$(get_valid_valname ${arr[$pick-1]})"
+    hint="$(get_hint $vname)"
+    [[ "$hint" == "" ]] && hint="${arr[$pick-1]}"
+    echo -e "\nyour selection: $hint\n"
+}
+
+version_ge(){
+    test "$(echo "$@" | tr " " "\n" | sort -rV | head -n 1)" == "$1"
+}
+
+get_latest_version() {
+    latest_version=($(wget -qO- http://kernel.ubuntu.com/~kernel-ppa/mainline/ | awk -F'\"v' '/v[4-9]./{print $2}' | cut -d/ -f1 | grep -v - | sort -V))
+
+    [ ${#latest_version[@]} -eq 0 ] && echo -e "${red}Error:${plain} Get latest kernel version failed." && exit 1
+
+    kernel_arr=()
+    for i in ${latest_version[@]}; do
+        if version_ge $i 4.14; then
+            kernel_arr+=($i);
+        fi
+    done
+
+    display_menu kernel last
+
+    if [[ `getconf WORD_BIT` == "32" && `getconf LONG_BIT` == "64" ]]; then
+        deb_name=$(wget -qO- http://kernel.ubuntu.com/~kernel-ppa/mainline/v${kernel}/ | grep "linux-image" | grep "generic" | awk -F'\">' '/amd64.deb/{print $2}' | cut -d'<' -f1 | head -1)
+        deb_kernel_url="http://kernel.ubuntu.com/~kernel-ppa/mainline/v${kernel}/${deb_name}"
+        deb_kernel_name="linux-image-${kernel}-amd64.deb"
+        modules_deb_name=$(wget -qO- http://kernel.ubuntu.com/~kernel-ppa/mainline/v${kernel}/ | grep "linux-modules" | grep "generic" | awk -F'\">' '/amd64.deb/{print $2}' | cut -d'<' -f1 | head -1)
+        deb_kernel_modules_url="http://kernel.ubuntu.com/~kernel-ppa/mainline/v${kernel}/${modules_deb_name}"
+        deb_kernel_modules_name="linux-modules-${kernel}-amd64.deb"
+    else
+        deb_name=$(wget -qO- http://kernel.ubuntu.com/~kernel-ppa/mainline/v${kernel}/ | grep "linux-image" | grep "generic" | awk -F'\">' '/i386.deb/{print $2}' | cut -d'<' -f1 | head -1)
+        deb_kernel_url="http://kernel.ubuntu.com/~kernel-ppa/mainline/v${kernel}/${deb_name}"
+        deb_kernel_name="linux-image-${kernel}-i386.deb"
+        modules_deb_name=$(wget -qO- http://kernel.ubuntu.com/~kernel-ppa/mainline/v${kernel}/ | grep "linux-modules" | grep "generic" | awk -F'\">' '/i386.deb/{print $2}' | cut -d'<' -f1 | head -1)
+        deb_kernel_modules_url="http://kernel.ubuntu.com/~kernel-ppa/mainline/v${kernel}/${modules_deb_name}"
+        deb_kernel_modules_name="linux-modules-${kernel}-i386.deb"
+    fi
+
+    [ -z ${deb_name} ] && echo -e "${red}Error:${plain} Getting Linux kernel binary package name failed, maybe kernel build failed. Please choose other one and try again." && exit 1
+}
+
+get_opsy() {
+    [ -f /etc/redhat-release ] && awk '{print ($1,$3~/^[0-9]/?$3:$4)}' /etc/redhat-release && return
+    [ -f /etc/os-release ] && awk -F'[= "]' '/PRETTY_NAME/{print $3,$4,$5}' /etc/os-release && return
+    [ -f /etc/lsb-release ] && awk -F'[="]+' '/DESCRIPTION/{print $2}' /etc/lsb-release && return
+}
+
+opsy=$( get_opsy )
+arch=$( uname -m )
+lbit=$( getconf LONG_BIT )
+kern=$( uname -r )
+
+get_char() {
+    SAVEDSTTY=`stty -g`
+    stty -echo
+    stty cbreak
+    dd if=/dev/tty bs=1 count=1 2> /dev/null
+    stty -raw
+    stty echo
+    stty $SAVEDSTTY
+}
+
+getversion() {
+    if [[ -s /etc/redhat-release ]]; then
+        grep -oE  "[0-9.]+" /etc/redhat-release
+    else
+        grep -oE  "[0-9.]+" /etc/issue
+    fi
+}
+
+centosversion() {
+    if [ x"${release}" == x"centos" ]; then
+        local code=$1
+        local version="$(getversion)"
+        local main_ver=${version%%.*}
+        if [ "$main_ver" == "$code" ]; then
+            return 0
+        else
+            return 1
+        fi
+    else
+        return 1
+    fi
+}
+
+check_bbr_status() {
+    local param=$(sysctl net.ipv4.tcp_congestion_control | awk '{print $3}')
+    if [[ x"${param}" == x"bbr" ]]; then
+        return 0
+    else
+        return 1
+    fi
+}
+
+check_kernel_version() {
+    local kernel_version=$(uname -r | cut -d- -f1)
+    if version_ge ${kernel_version} 4.9; then
+        return 0
+    else
+        return 1
+    fi
+}
+
+install_elrepo() {
+
+    if centosversion 5; then
+        echo -e "${red}Error:${plain} not supported CentOS 5."
+        exit 1
+    fi
+
+    rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
+
+    if centosversion 6; then
+        rpm -Uvh http://www.elrepo.org/elrepo-release-6-8.el6.elrepo.noarch.rpm
+    elif centosversion 7; then
+        rpm -Uvh http://www.elrepo.org/elrepo-release-7.0-3.el7.elrepo.noarch.rpm
+    fi
+
+    if [ ! -f /etc/yum.repos.d/elrepo.repo ]; then
+        echo -e "${red}Error:${plain} Install elrepo failed, please check it."
+        exit 1
+    fi
+}
+
+sysctl_config() {
+    sed -i '/net.core.default_qdisc/d' /etc/sysctl.conf
+    sed -i '/net.ipv4.tcp_congestion_control/d' /etc/sysctl.conf
+    echo "net.core.default_qdisc = fq" >> /etc/sysctl.conf
+    echo "net.ipv4.tcp_congestion_control = bbr" >> /etc/sysctl.conf
+    sysctl -p >/dev/null 2>&1
+}
+
+install_config() {
+    if [[ x"${release}" == x"centos" ]]; then
+        if centosversion 6; then
+            if [ ! -f "/boot/grub/grub.conf" ]; then
+                echo -e "${red}Error:${plain} /boot/grub/grub.conf not found, please check it."
+                exit 1
+            fi
+            sed -i 's/^default=.*/default=0/g' /boot/grub/grub.conf
+        elif centosversion 7; then
+            if [ ! -f "/boot/grub2/grub.cfg" ]; then
+                echo -e "${red}Error:${plain} /boot/grub2/grub.cfg not found, please check it."
+                exit 1
+            fi
+            grub2-set-default 0
+        fi
+    elif [[ x"${release}" == x"debian" || x"${release}" == x"ubuntu" ]]; then
+        /usr/sbin/update-grub
+    fi
+}
+
+reboot_os() {
+    echo
+    echo -e "${green}Info:${plain} The system needs to reboot."
+    read -p "Do you want to restart system? [y/n]" is_reboot
+    if [[ ${is_reboot} == "y" || ${is_reboot} == "Y" ]]; then
+        reboot
+    else
+        echo -e "${green}Info:${plain} Reboot has been canceled..."
+        exit 0
+    fi
+}
+
+install_bbr() {
+    check_bbr_status
+    if [ $? -eq 0 ]; then
+        echo
+        echo -e "${green}Info:${plain} TCP BBR has already been installed. nothing to do..."
+        exit 0
+    fi
+    check_kernel_version
+    if [ $? -eq 0 ]; then
+        echo
+        echo -e "${green}Info:${plain} Your kernel version is greater than 4.9, directly setting TCP BBR..."
+        sysctl_config
+        echo -e "${green}Info:${plain} Setting TCP BBR completed..."
+        exit 0
+    fi
+
+    if [[ x"${release}" == x"centos" ]]; then
+        install_elrepo
+        [ ! "$(command -v yum-config-manager)" ] && yum install -y yum-utils > /dev/null 2>&1
+        [ x"$(yum-config-manager elrepo-kernel | grep -w enabled | awk '{print $3}')" != x"True" ] && yum-config-manager --enable elrepo-kernel > /dev/null 2>&1
+        yum -y install kernel-ml kernel-ml-devel
+        if [ $? -ne 0 ]; then
+            echo -e "${red}Error:${plain} Install latest kernel failed, please check it."
+            exit 1
+        fi
+    elif [[ x"${release}" == x"debian" || x"${release}" == x"ubuntu" ]]; then
+        [[ ! -e "/usr/bin/wget" ]] && apt-get -y update && apt-get -y install wget
+        echo -e "${green}Info:${plain} Getting latest kernel version..."
+        get_latest_version
+        if [ -n ${modules_deb_name} ]; then
+            wget -c -t3 -T60 -O ${deb_kernel_modules_name} ${deb_kernel_modules_url}
+            if [ $? -ne 0 ]; then
+                echo -e "${red}Error:${plain} Download ${deb_kernel_modules_name} failed, please check it."
+                exit 1
+            fi
+        fi
+        wget -c -t3 -T60 -O ${deb_kernel_name} ${deb_kernel_url}
+        if [ $? -ne 0 ]; then
+            echo -e "${red}Error:${plain} Download ${deb_kernel_name} failed, please check it."
+            exit 1
+        fi
+        [ -f ${deb_kernel_modules_name} ] && dpkg -i ${deb_kernel_modules_name}
+        dpkg -i ${deb_kernel_name}
+        rm -f ${deb_kernel_name} ${deb_kernel_modules_name}
+    else
+        echo -e "${red}Error:${plain} OS is not be supported, please change to CentOS/Debian/Ubuntu and try again."
+        exit 1
+    fi
+
+    install_config
+    sysctl_config
+    reboot_os
+}
+
+
+clear
+echo "---------- System Information ----------"
+echo " OS      : $opsy"
+echo " Arch    : $arch ($lbit Bit)"
+echo " Kernel  : $kern"
+echo "----------------------------------------"
+echo " Auto install latest kernel for TCP BBR"
+echo
+echo " URL: https://teddysun.com/489.html"
+echo "----------------------------------------"
+echo
+echo "Press any key to start...or Press Ctrl+C to cancel"
+char=`get_char`
+
+install_bbr 2>&1 | tee ${cur_dir}/install_bbr.log

mtproxy_go.sh

@@ -0,0 +1,764 @@
+#!/usr/bin/env bash
+PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/bin
+export PATH
+
+#=================================================
+#	System Required: CentOS/Debian/Ubuntu
+#	Description: MTProxy Golang
+#	Version: 1.0.0
+#	Author: Toyo
+#	Blog: https://doub.io/shell-jc9/
+#=================================================
+
+sh_ver="1.0.0"
+filepath=$(cd "$(dirname "$0")"; pwd)
+file_1=$(echo -e "${filepath}"|awk -F "$0" '{print $1}')
+file="/usr/local/mtproxy-go"
+mtproxy_file="/usr/local/mtproxy-go/mtg"
+mtproxy_conf="/usr/local/mtproxy-go/mtproxy.conf"
+mtproxy_log="/usr/local/mtproxy-go/mtproxy.log"
+Now_ver_File="/usr/local/mtproxy-go/ver.txt"
+
+Green_font_prefix="\033[32m" && Red_font_prefix="\033[31m" && Green_background_prefix="\033[42;37m" && Red_background_prefix="\033[41;37m" && Font_color_suffix="\033[0m"
+Info="${Green_font_prefix}[信息]${Font_color_suffix}"
+Error="${Red_font_prefix}[错误]${Font_color_suffix}"
+Tip="${Green_font_prefix}[注意]${Font_color_suffix}"
+
+check_root(){
+	[[ $EUID != 0 ]] && echo -e "${Error} 当前非ROOT账号(或没有ROOT权限)，无法继续操作，请更换ROOT账号或使用 ${Green_background_prefix}sudo su${Font_color_suffix} 命令获取临时ROOT权限（执行后可能会提示输入当前账号的密码）。" && exit 1
+}
+#检查系统
+check_sys(){
+	if [[ -f /etc/redhat-release ]]; then
+		release="centos"
+	elif cat /etc/issue | grep -q -E -i "debian"; then
+		release="debian"
+	elif cat /etc/issue | grep -q -E -i "ubuntu"; then
+		release="ubuntu"
+	elif cat /etc/issue | grep -q -E -i "centos|red hat|redhat"; then
+		release="centos"
+	elif cat /proc/version | grep -q -E -i "debian"; then
+		release="debian"
+	elif cat /proc/version | grep -q -E -i "ubuntu"; then
+		release="ubuntu"
+	elif cat /proc/version | grep -q -E -i "centos|red hat|redhat"; then
+		release="centos"
+    fi
+	bit=`uname -m`
+}
+check_installed_status(){
+	[[ ! -e ${mtproxy_file} ]] && echo -e "${Error} MTProxy 没有安装，请检查 !" && exit 1
+}
+check_pid(){
+	PID=`ps -ef| grep "./mtg "| grep -v "grep" | grep -v "init.d" |grep -v "service" |awk '{print $2}'`
+}
+check_new_ver(){
+	new_ver=$(wget -qO- https://api.github.com/repos/9seconds/mtg/releases| grep "tag_name"| head -n 1| awk -F ":" '{print $2}'| sed 's/\"//g;s/,//g;s/ //g')
+	[[ -z ${new_ver} ]] && echo -e "${Error} MTProxy 最新版本获取失败！" && exit 1
+	echo -e "${Info} 检测到 MTProxy 最新版本为 [ ${new_ver} ]"
+}
+check_ver_comparison(){
+	now_ver=$(cat ${Now_ver_File})
+	if [[ "${now_ver}" != "${new_ver}" ]]; then
+		echo -e "${Info} 发现 MTProxy 已有新版本 [ ${new_ver} ]，旧版本 [ ${now_ver} ]"
+		read -e -p "是否更新 ? [Y/n] :" yn
+		[[ -z "${yn}" ]] && yn="y"
+		if [[ $yn == [Yy] ]]; then
+			check_pid
+			[[ ! -z $PID ]] && kill -9 ${PID}
+			\cp "${mtproxy_conf}" "/tmp/mtproxy.conf"
+			rm -rf ${file}
+			Download
+			mv "/tmp/mtproxy.conf" "${mtproxy_conf}"
+			Start
+		fi
+	else
+		echo -e "${Info} 当前 MTProxy 已是最新版本 [ ${new_ver} ]" && exit 1
+	fi
+}
+Download(){
+	if [[ ! -e "${file}" ]]; then
+		mkdir "${file}"
+	else
+		[[ -e "${mtproxy_file}" ]] && rm -rf "${mtproxy_file}"
+	fi
+	cd "${file}"
+	if [[ ${bit} == "x86_64" ]]; then
+		bit="amd64"
+	elif [[ ${bit} == "i386" || ${bit} == "i686" ]]; then
+		bit="386"
+	else
+		bit="arm"
+	fi
+	wget --no-check-certificate -N "https://github.com/9seconds/mtg/releases/download/${new_ver}/mtg-linux-${bit}"
+	[[ ! -e "mtg-linux-${bit}" ]] && echo -e "${Error} MTProxy 下载失败 !" && rm -rf "${file}" && exit 1
+	mv "mtg-linux-${bit}" "mtg"
+	[[ ! -e "mtg" ]] && echo -e "${Error} MTProxy 重命名失败 !" && rm -rf "${file}" && exit 1
+	chmod +x mtg
+	echo "${new_ver}" > ${Now_ver_File}
+}
+Service(){
+	if [[ ${release} = "centos" ]]; then
+		if ! wget --no-check-certificate "https://raw.githubusercontent.com/ToyoDAdoubi/doubi/master/service/mtproxy_go_centos" -O /etc/init.d/mtproxy-go; then
+			echo -e "${Error} MTProxy服务 管理脚本下载失败 !"
+			rm -rf "${file}"
+			exit 1
+		fi
+		chmod +x "/etc/init.d/mtproxy-go"
+		chkconfig --add mtproxy-go
+		chkconfig mtproxy-go on
+	else
+		if ! wget --no-check-certificate "https://raw.githubusercontent.com/ToyoDAdoubi/doubi/master/service/mtproxy_go_debian" -O /etc/init.d/mtproxy-go; then
+			echo -e "${Error} MTProxy服务 管理脚本下载失败 !"
+			rm -rf "${file}"
+			exit 1
+		fi
+		chmod +x "/etc/init.d/mtproxy-go"
+		update-rc.d -f mtproxy-go defaults
+	fi
+	echo -e "${Info} MTProxy服务 管理脚本下载完成 !"
+}
+Installation_dependency(){
+	\cp -f /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
+}
+Write_config(){
+	cat > ${mtproxy_conf}<<-EOF
+PORT = ${mtp_port}
+PASSWORD = ${mtp_passwd}
+TAG = ${mtp_tag}
+NAT-IPv4 = ${mtp_nat_ipv4}
+NAT-IPv6 = ${mtp_nat_ipv6}
+SECURE = ${mtp_secure}
+EOF
+}
+Read_config(){
+	[[ ! -e ${mtproxy_conf} ]] && echo -e "${Error} MTProxy 配置文件不存在 !" && exit 1
+	port=$(cat ${mtproxy_conf}|grep 'PORT = '|awk -F 'PORT = ' '{print $NF}')
+	passwd=$(cat ${mtproxy_conf}|grep 'PASSWORD = '|awk -F 'PASSWORD = ' '{print $NF}')
+	tag=$(cat ${mtproxy_conf}|grep 'TAG = '|awk -F 'TAG = ' '{print $NF}')
+	nat_ipv4=$(cat ${mtproxy_conf}|grep 'NAT-IPv4 = '|awk -F 'NAT-IPv4 = ' '{print $NF}')
+	nat_ipv6=$(cat ${mtproxy_conf}|grep 'NAT-IPv6 = '|awk -F 'NAT-IPv6 = ' '{print $NF}')
+	secure=$(cat ${mtproxy_conf}|grep 'SECURE = '|awk -F 'SECURE = ' '{print $NF}')
+}
+Set_port(){
+	while true
+		do
+		echo -e "请输入 MTProxy 端口 [1-65535]"
+		read -e -p "(默认: 443):" mtp_port
+		[[ -z "${mtp_port}" ]] && mtp_port="443"
+		echo $((${mtp_port}+0)) &>/dev/null
+		if [[ $? -eq 0 ]]; then
+			if [[ ${mtp_port} -ge 1 ]] && [[ ${mtp_port} -le 65535 ]]; then
+				echo && echo "========================"
+				echo -e "	端口 : ${Red_background_prefix} ${mtp_port} ${Font_color_suffix}"
+				echo "========================" && echo
+				break
+			else
+				echo "输入错误, 请输入正确的端口。"
+			fi
+		else
+			echo "输入错误, 请输入正确的端口。"
+		fi
+		done
+}
+Set_passwd(){
+	while true
+		do
+		echo "请输入 MTProxy 密匙（手动输入必须为32位，[0-9][a-z][A-Z]，建议随机生成）"
+		read -e -p "(避免出错，强烈推荐随机生成，直接回车):" mtp_passwd
+		if [[ -z "${mtp_passwd}" ]]; then
+			mtp_passwd=$(date +%s%N | md5sum | head -c 32)
+		else
+			[[ ${#mtp_passwd} != 32 ]] && echo -e "${Error} 请输入正确的密匙（32位字符）。" && continue
+		fi
+		echo && echo "========================"
+		echo -e "	密码 : ${Red_background_prefix} dd${mtp_passwd} ${Font_color_suffix}"
+		echo "========================" && echo
+		break
+	done
+}
+Set_tag(){
+	echo "请输入 MTProxy 的 TAG标签（TAG标签必须是32位，TAG标签只有在通过官方机器人 @MTProxybot 分享代理账号后才会获得，不清楚请留空回车）"
+	read -e -p "(默认：回车跳过):" mtp_tag
+	if [[ ! -z "${mtp_tag}" ]]; then
+		echo && echo "========================"
+		echo -e "	TAG : ${Red_background_prefix} ${mtp_tag} ${Font_color_suffix}"
+		echo "========================" && echo
+	else
+		echo
+	fi
+}
+Set_nat(){
+	echo -e "如果本机是NAT服务器（谷歌云、微软云、阿里云等，网卡绑定的IP为 10.xx.xx.xx 开头的），则需要指定公网 IPv4。"
+	read -e -p "(默认：自动检测 IPv4 地址):" mtp_nat_ipv4
+	if [[ -z "${mtp_nat_ipv4}" ]]; then
+		getipv4
+		if [[ "${ipv4}" == "IPv4_Error" ]]; then
+			mtp_nat_ipv4=""
+		else
+			mtp_nat_ipv4="${ipv4}"
+		fi
+		echo && echo "========================"
+		echo -e "	NAT-IPv4 : ${Red_background_prefix} ${mtp_nat_ipv4} ${Font_color_suffix}"
+		echo "========================" && echo
+	fi
+	echo -e "如果本机是NAT服务器（谷歌云、微软云、阿里云等），则需要指定公网 IPv6。"
+	read -e -p "(默认：自动检测 IPv6 地址):" mtp_nat_ipv6
+	if [[ -z "${mtp_nat_ipv6}" ]]; then
+		getipv6
+		if [[ "${ipv6}" == "IPv6_Error" ]]; then
+			mtp_nat_ipv6=""
+		else
+			mtp_nat_ipv6="${ipv6}"
+		fi
+		echo && echo "========================"
+		echo -e "	NAT-IPv6 : ${Red_background_prefix} ${mtp_nat_ipv6} ${Font_color_suffix}"
+		echo "========================" && echo
+	fi
+}
+Set_secure(){
+	echo -e "是否启用强制安全模式？[Y/n]
+只有启用[安全混淆模式]的客户端才能链接(即密匙头部有 dd 字符)，降低服务器被墙几率，建议开启。"
+	read -e -p "(默认：Y 启用):" mtp_secure
+	[[ -z "${mtp_secure}" ]] && mtp_secure="Y"
+	if [[ "${mtp_secure}" == [Yy] ]]; then
+		mtp_secure="YES"
+	else
+		mtp_secure="NO"
+	fi
+	echo && echo "========================"
+	echo -e "	强制安全模式 : ${Red_background_prefix} ${mtp_secure} ${Font_color_suffix}"
+	echo "========================" && echo
+}
+Set(){
+	check_installed_status
+	echo && echo -e "你要做什么？
+ ${Green_font_prefix}1.${Font_color_suffix}  修改 端口配置
+ ${Green_font_prefix}2.${Font_color_suffix}  修改 密码配置
+ ${Green_font_prefix}3.${Font_color_suffix}  修改 TAG 配置
+ ${Green_font_prefix}4.${Font_color_suffix}  修改 NAT 配置
+ ${Green_font_prefix}5.${Font_color_suffix}  修改 强制安全模式 配置
+ ${Green_font_prefix}6.${Font_color_suffix}  修改 全部配置
+————————————————
+ ${Green_font_prefix}7.${Font_color_suffix}  监控 运行状态" && echo
+	read -e -p "(默认: 取消):" mtp_modify
+	[[ -z "${mtp_modify}" ]] && echo "已取消..." && exit 1
+	if [[ "${mtp_modify}" == "1" ]]; then
+		Read_config
+		Set_port
+		mtp_passwd=${passwd}
+		mtp_tag=${tag}
+		mtp_nat_ipv4=${nat_ipv4}
+		mtp_nat_ipv6=${nat_ipv6}
+		mtp_secure=${secure}
+		Write_config
+		Del_iptables
+		Add_iptables
+		Restart
+	elif [[ "${mtp_modify}" == "2" ]]; then
+		Read_config
+		Set_passwd
+		mtp_port=${port}
+		mtp_tag=${tag}
+		mtp_nat_ipv4=${nat_ipv4}
+		mtp_nat_ipv6=${nat_ipv6}
+		mtp_secure=${secure}
+		Write_config
+		Restart
+	elif [[ "${mtp_modify}" == "3" ]]; then
+		Read_config
+		Set_tag
+		mtp_port=${port}
+		mtp_passwd=${passwd}
+		mtp_nat_ipv4=${nat_ipv4}
+		mtp_nat_ipv6=${nat_ipv6}
+		mtp_secure=${secure}
+		Write_config
+		Restart
+	elif [[ "${mtp_modify}" == "4" ]]; then
+		Read_config
+		Set_nat
+		mtp_port=${port}
+		mtp_passwd=${passwd}
+		mtp_tag=${tag}
+		mtp_secure=${secure}
+		Write_config
+		Restart
+	elif [[ "${mtp_modify}" == "5" ]]; then
+		Read_config
+		Set_secure
+		mtp_port=${port}
+		mtp_passwd=${passwd}
+		mtp_tag=${tag}
+		mtp_nat_ipv4=${nat_ipv4}
+		mtp_nat_ipv6=${nat_ipv6}
+		Write_config
+		Restart
+	elif [[ "${mtp_modify}" == "6" ]]; then
+		Read_config
+		Set_port
+		Set_passwd
+		Set_tag
+		Set_nat
+		Set_secure
+		Write_config
+		Restart
+	elif [[ "${mtp_modify}" == "7" ]]; then
+		Set_crontab_monitor
+	else
+		echo -e "${Error} 请输入正确的数字(1-7)" && exit 1
+	fi
+}
+Install(){
+	check_root
+	[[ -e ${mtproxy_file} ]] && echo -e "${Error} 检测到 MTProxy 已安装 !" && exit 1
+	echo -e "${Info} 开始设置 用户配置..."
+	Set_port
+	Set_passwd
+	Set_tag
+	Set_nat
+	Set_secure
+	echo -e "${Info} 开始安装/配置 依赖..."
+	Installation_dependency
+	echo -e "${Info} 开始下载/安装..."
+	check_new_ver
+	Download
+	echo -e "${Info} 开始下载/安装 服务脚本(init)..."
+	Service
+	echo -e "${Info} 开始写入 配置文件..."
+	Write_config
+	echo -e "${Info} 开始设置 iptables防火墙..."
+	Set_iptables
+	echo -e "${Info} 开始添加 iptables防火墙规则..."
+	Add_iptables
+	echo -e "${Info} 开始保存 iptables防火墙规则..."
+	Save_iptables
+	echo -e "${Info} 所有步骤 安装完毕，开始启动..."
+	Start
+}
+Start(){
+	check_installed_status
+	check_pid
+	[[ ! -z ${PID} ]] && echo -e "${Error} MTProxy 正在运行，请检查 !" && exit 1
+	/etc/init.d/mtproxy-go start
+	sleep 1s
+	check_pid
+	[[ ! -z ${PID} ]] && View
+}
+Stop(){
+	check_installed_status
+	check_pid
+	[[ -z ${PID} ]] && echo -e "${Error} MTProxy 没有运行，请检查 !" && exit 1
+	/etc/init.d/mtproxy-go stop
+}
+Restart(){
+	check_installed_status
+	check_pid
+	[[ ! -z ${PID} ]] && /etc/init.d/mtproxy-go stop
+	/etc/init.d/mtproxy-go start
+	sleep 1s
+	check_pid
+	[[ ! -z ${PID} ]] && View
+}
+Update(){
+	check_installed_status
+	check_new_ver
+	check_ver_comparison
+}
+Uninstall(){
+	check_installed_status
+	echo "确定要卸载 MTProxy ? (y/N)"
+	echo
+	read -e -p "(默认: n):" unyn
+	[[ -z ${unyn} ]] && unyn="n"
+	if [[ ${unyn} == [Yy] ]]; then
+		check_pid
+		[[ ! -z $PID ]] && kill -9 ${PID}
+		if [[ -e ${mtproxy_conf} ]]; then
+			port=$(cat ${mtproxy_conf}|grep 'PORT = '|awk -F 'PORT = ' '{print $NF}')
+			Del_iptables
+			Save_iptables
+		fi
+		if [[ ! -z $(crontab -l | grep "mtproxy_go.sh monitor") ]]; then
+			crontab_monitor_cron_stop
+		fi
+		rm -rf "${file}"
+		if [[ ${release} = "centos" ]]; then
+			chkconfig --del mtproxy-go
+		else
+			update-rc.d -f mtproxy-go remove
+		fi
+		rm -rf "/etc/init.d/mtproxy-go"
+		echo && echo "MTProxy 卸载完成 !" && echo
+	else
+		echo && echo "卸载已取消..." && echo
+	fi
+}
+getipv4(){
+	ipv4=$(wget -qO- -4 -t1 -T2 ipinfo.io/ip)
+	if [[ -z "${ipv4}" ]]; then
+		ipv4=$(wget -qO- -4 -t1 -T2 api.ip.sb/ip)
+		if [[ -z "${ipv4}" ]]; then
+			ipv4=$(wget -qO- -4 -t1 -T2 members.3322.org/dyndns/getip)
+			if [[ -z "${ipv4}" ]]; then
+				ipv4="IPv4_Error"
+			fi
+		fi
+	fi
+}
+getipv6(){
+	ipv6=$(wget -qO- -6 -t1 -T3 ifconfig.co)
+	if [[ -z "${ipv6}" ]]; then
+		ipv6="IPv6_Error"
+	fi
+}
+View(){
+	check_installed_status
+	Read_config
+	#getipv4
+	#getipv6
+	clear && echo
+	echo -e "Mtproto Proxy 用户配置："
+	echo -e "————————————————"
+	echo -e " 地址\t: ${Green_font_prefix}${nat_ipv4}${Font_color_suffix}"
+	[[ ! -z "${nat_ipv6}" ]] && echo -e " 地址\t: ${Green_font_prefix}${nat_ipv6}${Font_color_suffix}"
+	echo -e " 端口\t: ${Green_font_prefix}${port}${Font_color_suffix}"
+	echo -e " 密匙\t: ${Green_font_prefix}dd${passwd}${Font_color_suffix}"
+	[[ ! -z "${tag}" ]] && echo -e " TAG \t: ${Green_font_prefix}${tag}${Font_color_suffix}"
+	echo -e " 链接\t: ${Red_font_prefix}tg://proxy?server=${nat_ipv4}&port=${port}&secret=dd${passwd}${Font_color_suffix}"
+	echo -e " 链接\t: ${Red_font_prefix}https://t.me/proxy?server=${nat_ipv4}&port=${port}&secret=dd${passwd}${Font_color_suffix}"
+	[[ ! -z "${nat_ipv6}" ]] && echo -e " 链接\t: ${Red_font_prefix}tg://proxy?server=${nat_ipv6}&port=${port}&secret=dd${passwd}${Font_color_suffix}"
+	[[ ! -z "${nat_ipv6}" ]] && echo -e " 链接\t: ${Red_font_prefix}https://t.me/proxy?server=${nat_ipv6}&port=${port}&secret=dd${passwd}${Font_color_suffix}"
+	echo
+	echo -e " 强制安全模式\t: ${Green_font_prefix}${secure}${Font_color_suffix}"
+	echo
+	echo -e " ${Red_font_prefix}注意\t:${Font_color_suffix} 密匙头部的 ${Green_font_prefix}dd${Font_color_suffix} 字符是代表客户端启用${Green_font_prefix}安全混淆模式${Font_color_suffix}，可以降低服务器被墙几率。\n     \t  另外，在官方机器人处分享账号获取TAG标签时记得删除，获取TAG标签后分享时可以再加上。"
+}
+View_Log(){
+	check_installed_status
+	[[ ! -e ${mtproxy_log} ]] && echo -e "${Error} MTProxy 日志文件不存在 !" && exit 1
+	echo && echo -e "${Tip} 按 ${Red_font_prefix}Ctrl+C${Font_color_suffix} 终止查看日志" && echo -e "如果需要查看完整日志内容，请用 ${Red_font_prefix}cat ${mtproxy_log}${Font_color_suffix} 命令。" && echo
+	tail -f ${mtproxy_log}
+}
+Update_secret(){
+	rm -rf "${mtproxy_secret}"
+	Download_secret
+	Restart
+}
+Update_multi(){
+	rm -rf "${mtproxy_multi}"
+	Download_multi
+	Restart
+}
+# 显示 连接信息
+debian_View_user_connection_info(){
+	format_1=$1
+	Read_config
+	user_IP=$(ss state connected sport = :${port} -tn|sed '1d'|awk '{print $NF}'|awk -F ':' '{print $(NF-1)}'|sort -u)
+	if [[ -z ${user_IP} ]]; then
+		user_IP_total="0"
+		echo -e "端口: ${Green_font_prefix}"${port}"${Font_color_suffix}\t 链接IP总数: ${Green_font_prefix}"${user_IP_total}"${Font_color_suffix}\t 当前链接IP: "
+	else
+		user_IP_total=$(echo -e "${user_IP}"|wc -l)
+		if [[ ${format_1} == "IP_address" ]]; then
+			echo -e "端口: ${Green_font_prefix}"${port}"${Font_color_suffix}\t 链接IP总数: ${Green_font_prefix}"${user_IP_total}"${Font_color_suffix}\t 当前链接IP: "
+			get_IP_address
+			echo
+		else
+			user_IP=$(echo -e "\n${user_IP}")
+			echo -e "端口: ${Green_font_prefix}"${user_port}"${Font_color_suffix}\t 链接IP总数: ${Green_font_prefix}"${user_IP_total}"${Font_color_suffix}\t 当前链接IP: ${Green_font_prefix}${user_IP}${Font_color_suffix}\n"
+		fi
+	fi
+	user_IP=""
+}
+centos_View_user_connection_info(){
+	format_1=$1
+	Read_config
+	user_IP=$(ss state connected sport = :${port} -tn|sed '1d'|awk '{print $NF}'|awk -F ':' '{print $(NF-1)}'|sort -u)
+	if [[ -z ${user_IP} ]]; then
+		user_IP_total="0"
+		echo -e "端口: ${Green_font_prefix}"${port}"${Font_color_suffix}\t 链接IP总数: ${Green_font_prefix}"${user_IP_total}"${Font_color_suffix}\t 当前链接IP: "
+	else
+		user_IP_total=$(echo -e "${user_IP}"|wc -l)
+		if [[ ${format_1} == "IP_address" ]]; then
+			echo -e "端口: ${Green_font_prefix}"${port}"${Font_color_suffix}\t 链接IP总数: ${Green_font_prefix}"${user_IP_total}"${Font_color_suffix}\t 当前链接IP: "
+			get_IP_address
+			echo
+		else
+			user_IP=$(echo -e "\n${user_IP}")
+			echo -e "端口: ${Green_font_prefix}"${port}"${Font_color_suffix}\t 链接IP总数: ${Green_font_prefix}"${user_IP_total}"${Font_color_suffix}\t 当前链接IP: ${Green_font_prefix}${user_IP}${Font_color_suffix}\n"
+		fi
+	fi
+	user_IP=""
+}
+View_user_connection_info(){
+	check_installed_status
+	echo && echo -e "请选择要显示的格式：
+ ${Green_font_prefix}1.${Font_color_suffix} 显示 IP 格式
+ ${Green_font_prefix}2.${Font_color_suffix} 显示 IP+IP归属地 格式" && echo
+	read -e -p "(默认: 1):" mtproxy_connection_info
+	[[ -z "${mtproxy_connection_info}" ]] && mtproxy_connection_info="1"
+	if [[ "${mtproxy_connection_info}" == "1" ]]; then
+		View_user_connection_info_1 ""
+	elif [[ "${mtproxy_connection_info}" == "2" ]]; then
+		echo -e "${Tip} 检测IP归属地(ipip.net)，如果IP较多，可能时间会比较长..."
+		View_user_connection_info_1 "IP_address"
+	else
+		echo -e "${Error} 请输入正确的数字(1-2)" && exit 1
+	fi
+}
+View_user_connection_info_1(){
+	format=$1
+	debian_View_user_connection_info "$format"
+}
+get_IP_address(){
+	if [[ ! -z ${user_IP} ]]; then
+		for((integer_1 = ${user_IP_total}; integer_1 >= 1; integer_1--))
+		do
+			IP=$(echo "${user_IP}" |sed -n "$integer_1"p)
+			IP_address=$(wget -qO- -t1 -T2 http://freeapi.ipip.net/${IP}|sed 's/\"//g;s/,//g;s/\[//g;s/\]//g')
+			echo -e "${Green_font_prefix}${IP}${Font_color_suffix} (${IP_address})"
+			sleep 1s
+		done
+	fi
+}
+Set_crontab_monitor(){
+	check_crontab_installed_status
+	crontab_monitor_status=$(crontab -l|grep "mtproxy_go.sh monitor")
+	if [[ -z "${crontab_monitor_status}" ]]; then
+		echo && echo -e "当前监控模式: ${Red_font_prefix}未开启${Font_color_suffix}" && echo
+		echo -e "确定要开启 ${Green_font_prefix}MTProxy 服务端运行状态监控${Font_color_suffix} 功能吗？(当进程关闭则自动启动 MTProxy 服务端)[Y/n]"
+		read -e -p "(默认: y):" crontab_monitor_status_ny
+		[[ -z "${crontab_monitor_status_ny}" ]] && crontab_monitor_status_ny="y"
+		if [[ ${crontab_monitor_status_ny} == [Yy] ]]; then
+			crontab_monitor_cron_start
+		else
+			echo && echo "	已取消..." && echo
+		fi
+	else
+		echo && echo -e "当前监控模式: ${Green_font_prefix}已开启${Font_color_suffix}" && echo
+		echo -e "确定要关闭 ${Red_font_prefix}MTProxy 服务端运行状态监控${Font_color_suffix} 功能吗？(当进程关闭则自动启动 MTProxy 服务端)[y/N]"
+		read -e -p "(默认: n):" crontab_monitor_status_ny
+		[[ -z "${crontab_monitor_status_ny}" ]] && crontab_monitor_status_ny="n"
+		if [[ ${crontab_monitor_status_ny} == [Yy] ]]; then
+			crontab_monitor_cron_stop
+		else
+			echo && echo "	已取消..." && echo
+		fi
+	fi
+}
+crontab_monitor_cron_start(){
+	crontab -l > "$file_1/crontab.bak"
+	sed -i "/mtproxy_go.sh monitor/d" "$file_1/crontab.bak"
+	echo -e "\n* * * * * /bin/bash $file_1/mtproxy_go.sh monitor" >> "$file_1/crontab.bak"
+	crontab "$file_1/crontab.bak"
+	rm -r "$file_1/crontab.bak"
+	cron_config=$(crontab -l | grep "mtproxy_go.sh monitor")
+	if [[ -z ${cron_config} ]]; then
+		echo -e "${Error} MTProxy 服务端运行状态监控功能 启动失败 !" && exit 1
+	else
+		echo -e "${Info} MTProxy 服务端运行状态监控功能 启动成功 !"
+	fi
+}
+crontab_monitor_cron_stop(){
+	crontab -l > "$file_1/crontab.bak"
+	sed -i "/mtproxy_go.sh monitor/d" "$file_1/crontab.bak"
+	crontab "$file_1/crontab.bak"
+	rm -r "$file_1/crontab.bak"
+	cron_config=$(crontab -l | grep "mtproxy_go.sh monitor")
+	if [[ ! -z ${cron_config} ]]; then
+		echo -e "${Error} MTProxy 服务端运行状态监控功能 停止失败 !" && exit 1
+	else
+		echo -e "${Info} MTProxy 服务端运行状态监控功能 停止成功 !"
+	fi
+}
+crontab_monitor(){
+	check_installed_status
+	check_pid
+	#echo "${PID}"
+	if [[ -z ${PID} ]]; then
+		echo -e "${Error} [$(date "+%Y-%m-%d %H:%M:%S %u %Z")] 检测到 MTProxy服务端 未运行 , 开始启动..." | tee -a ${mtproxy_log}
+		/etc/init.d/mtproxy-go start
+		sleep 1s
+		check_pid
+		if [[ -z ${PID} ]]; then
+			echo -e "${Error} [$(date "+%Y-%m-%d %H:%M:%S %u %Z")] MTProxy服务端 启动失败..." | tee -a ${mtproxy_log}
+		else
+			echo -e "${Info} [$(date "+%Y-%m-%d %H:%M:%S %u %Z")] MTProxy服务端 启动成功..." | tee -a ${mtproxy_log}
+		fi
+	else
+		echo -e "${Info} [$(date "+%Y-%m-%d %H:%M:%S %u %Z")] MTProxy服务端 进程运行正常..." | tee -a ${mtproxy_log}
+	fi
+}
+Set_crontab_update_multi(){
+	check_crontab_installed_status
+	crontab_update_status=$(crontab -l|grep "mtproxy_go.sh update")
+	if [[ -z "${crontab_update_status}" ]]; then
+		echo && echo -e "当前自动更新 Telegram IP段功能: ${Red_font_prefix}未开启${Font_color_suffix}" && echo
+		echo -e "确定要开启 ${Green_font_prefix}MTProxy 自动更新 Telegram IP段${Font_color_suffix} 功能吗？[Y/n]"
+		read -e -p "(默认: y):" crontab_update_status_ny
+		[[ -z "${crontab_update_status_ny}" ]] && crontab_update_status_ny="y"
+		if [[ ${crontab_update_status_ny} == [Yy] ]]; then
+			crontab_update_cron_start
+		else
+			echo && echo "	已取消..." && echo
+		fi
+	else
+		echo && echo -e "当前自动更新 Telegram IP段功能: ${Green_font_prefix}已开启${Font_color_suffix}" && echo
+		echo -e "确定要关闭 ${Red_font_prefix}MTProxy 自动更新 Telegram IP段${Font_color_suffix} 功能吗？[y/N]"
+		read -e -p "(默认: n):" crontab_update_status_ny
+		[[ -z "${crontab_update_status_ny}" ]] && crontab_update_status_ny="n"
+		if [[ ${crontab_update_status_ny} == [Yy] ]]; then
+			crontab_update_cron_stop
+		else
+			echo && echo "	已取消..." && echo
+		fi
+	fi
+}
+crontab_update_cron_start(){
+	crontab -l > "$file_1/crontab.bak"
+	sed -i "/mtproxy_go.sh update/d" "$file_1/crontab.bak"
+	echo -e "\n10 3 * * * /bin/bash $file_1/mtproxy_go.sh update" >> "$file_1/crontab.bak"
+	crontab "$file_1/crontab.bak"
+	rm -r "$file_1/crontab.bak"
+	cron_config=$(crontab -l | grep "mtproxy_go.sh update")
+	if [[ -z ${cron_config} ]]; then
+		echo -e "${Error} MTProxy 自动更新 Telegram IP段功能 启动失败 !" && exit 1
+	else
+		echo -e "${Info} MTProxy 自动更新 Telegram IP段功能 启动成功 !"
+	fi
+}
+crontab_update_cron_stop(){
+	crontab -l > "$file_1/crontab.bak"
+	sed -i "/mtproxy_go.sh update/d" "$file_1/crontab.bak"
+	crontab "$file_1/crontab.bak"
+	rm -r "$file_1/crontab.bak"
+	cron_config=$(crontab -l | grep "mtproxy_go.sh update")
+	if [[ ! -z ${cron_config} ]]; then
+		echo -e "${Error} MTProxy 自动更新 Telegram IP段功能 停止失败 !" && exit 1
+	else
+		echo -e "${Info} MTProxy 自动更新 Telegram IP段功能 停止成功 !"
+	fi
+}
+crontab_update(){
+	check_installed_status
+	check_pid
+	rm -rf "${mtproxy_multi}"
+	Download_multi
+	echo -e "${Info} [$(date "+%Y-%m-%d %H:%M:%S %u %Z")] Telegram IP段自动更新完成..." | tee -a ${mtproxy_log}
+	/etc/init.d/mtproxy-go restart
+}
+Add_iptables(){
+	iptables -I INPUT -m state --state NEW -m tcp -p tcp --dport ${mtp_port} -j ACCEPT
+	ip6tables -I INPUT -m state --state NEW -m tcp -p tcp --dport ${mtp_port} -j ACCEPT
+}
+Del_iptables(){
+	iptables -D INPUT -m state --state NEW -m tcp -p tcp --dport ${port} -j ACCEPT
+	ip6tables -D INPUT -m state --state NEW -m tcp -p tcp --dport ${port} -j ACCEPT
+}
+Save_iptables(){
+	if [[ ${release} == "centos" ]]; then
+		service iptables save
+		service ip6tables save
+	else
+		iptables-save > /etc/iptables.up.rules
+		ip6tables-save > /etc/ip6tables.up.rules
+	fi
+}
+Set_iptables(){
+	if [[ ${release} == "centos" ]]; then
+		service iptables save
+		service ip6tables save
+		chkconfig --level 2345 iptables on
+		chkconfig --level 2345 ip6tables on
+	else
+		iptables-save > /etc/iptables.up.rules
+		ip6tables-save > /etc/ip6tables.up.rules
+		echo -e '#!/bin/bash\n/sbin/iptables-restore < /etc/iptables.up.rules\n/sbin/ip6tables-restore < /etc/ip6tables.up.rules' > /etc/network/if-pre-up.d/iptables
+		chmod +x /etc/network/if-pre-up.d/iptables
+	fi
+}
+Update_Shell(){
+	sh_new_ver=$(wget --no-check-certificate -qO- -t1 -T3 "https://raw.githubusercontent.com/ToyoDAdoubi/doubi/master/mtproxy_go.sh"|grep 'sh_ver="'|awk -F "=" '{print $NF}'|sed 's/\"//g'|head -1) && sh_new_type="github"
+	[[ -z ${sh_new_ver} ]] && echo -e "${Error} 无法链接到 Github !" && exit 0
+	if [[ -e "/etc/init.d/mtproxy-go" ]]; then
+		rm -rf /etc/init.d/mtproxy-go
+		Service
+	fi
+	wget -N --no-check-certificate "https://raw.githubusercontent.com/ToyoDAdoubi/doubi/master/mtproxy_go.sh" && chmod +x mtproxy_go.sh
+	echo -e "脚本已更新为最新版本[ ${sh_new_ver} ] !(注意：因为更新方式为直接覆盖当前运行的脚本，所以可能下面会提示一些报错，无视即可)" && exit 0
+}
+check_sys
+action=$1
+if [[ "${action}" == "monitor" ]]; then
+	crontab_monitor
+else
+	echo && echo -e "  MTProxy-Go 一键管理脚本 ${Red_font_prefix}[v${sh_ver}]${Font_color_suffix}
+  ---- Toyo | doub.io/shell-jc9 ----
+  
+ ${Green_font_prefix} 0.${Font_color_suffix} 升级脚本
+————————————
+ ${Green_font_prefix} 1.${Font_color_suffix} 安装 MTProxy
+ ${Green_font_prefix} 2.${Font_color_suffix} 更新 MTProxy
+ ${Green_font_prefix} 3.${Font_color_suffix} 卸载 MTProxy
+————————————
+ ${Green_font_prefix} 4.${Font_color_suffix} 启动 MTProxy
+ ${Green_font_prefix} 5.${Font_color_suffix} 停止 MTProxy
+ ${Green_font_prefix} 6.${Font_color_suffix} 重启 MTProxy
+————————————
+ ${Green_font_prefix} 7.${Font_color_suffix} 设置 账号配置
+ ${Green_font_prefix} 8.${Font_color_suffix} 查看 账号信息
+ ${Green_font_prefix} 9.${Font_color_suffix} 查看 日志信息
+ ${Green_font_prefix}10.${Font_color_suffix} 查看 链接信息
+————————————" && echo
+	if [[ -e ${mtproxy_file} ]]; then
+		check_pid
+		if [[ ! -z "${PID}" ]]; then
+			echo -e " 当前状态: ${Green_font_prefix}已安装${Font_color_suffix} 并 ${Green_font_prefix}已启动${Font_color_suffix}"
+		else
+			echo -e " 当前状态: ${Green_font_prefix}已安装${Font_color_suffix} 但 ${Red_font_prefix}未启动${Font_color_suffix}"
+		fi
+	else
+		echo -e " 当前状态: ${Red_font_prefix}未安装${Font_color_suffix}"
+	fi
+	echo
+	read -e -p " 请输入数字 [0-10]:" num
+	case "$num" in
+		0)
+		Update_Shell
+		;;
+		1)
+		Install
+		;;
+		2)
+		Update
+		;;
+		3)
+		Uninstall
+		;;
+		4)
+		Start
+		;;
+		5)
+		Stop
+		;;
+		6)
+		Restart
+		;;
+		7)
+		Set
+		;;
+		8)
+		View
+		;;
+		9)
+		View_Log
+		;;
+		10)
+		View_user_connection_info
+		;;
+		*)
+		echo "请输入正确数字 [0-10]"
+		;;
+	esac
+fi