vps_setup/Wireguard/wgmtu.sh

#!/bin/bash
# WireGuard 管理使用命令 bash wgmtu    短网址: https://git.io/wgmtu

# Usage:  wget https://git.io/wgmtu && bash wgmtu

# 修改mtu数值
setmtu(){
    echo -e "${GreenBG}WireGuard 修改服务器端MTU值,提高效率;默认值MTU=1420${Font}"
    read -p "请输入数字(1200--1500): " num

    if [[ ${num} -ge 1200 ]] && [[ ${num} -le 1500 ]]; then
       mtu=$num
    else
       mtu=1420
    fi

    ip link set mtu $num up dev wg0
    wg-quick save wg0
    echo -e "${SkyBlue}:: 服务器端MTU值已经修改!${Font}"
}

# 修改端口号
setport(){
    echo -e "${GreenBG}修改 WireGuard 服务器端端口号，客户端要自行修改${Font}"
    read -p "请输入数字(100--60000): " num

    if [[ ${num} -ge 100 ]] && [[ ${num} -le 60000 ]]; then
       port=$num
       wg set wg0 listen-port $port
       wg-quick save wg0

       echo -e "${SkyBlue}:: 端口号已经修改, 客户端请手工修改! ${Font}"
    else
       echo -e "${Red}:: 没有修改端口号!${Font}"
    fi
}

# 显示客户端配置和手机二维码
conf_QRcode(){
    echo -e "${Yellow}:: 显示客户端配置和手机二维码 (默认2号),请输入数字${Font}\c"
    read -p "(2-9): " x

    if [[ ${x} -ge 2 ]] && [[ ${x} -le 9 ]]; then
       i=$x
    else
       i=2
    fi

    host=$(hostname -s)
    echo -e "${SkyBlue}:: 客户端配置文件: wg_${host}_$i.conf ${Font}"
    cat /etc/wireguard/wg_${host}_$i.conf
    echo -e "${SkyBlue}:: 请使用组合键 Ctrl+Ins 复制文本给Windows客户端使用${Font}"
    cat /etc/wireguard/wg_${host}_$i.conf | qrencode -o - -t UTF8
    echo -e "${Green}:: 配置文件: wg_${host}_$i.conf 生成二维码，请用手机客户端扫描使用${Font}"

    echo -e "${SkyBlue}:: 安卓手机WireGuard官方APP目前支持纯IPV6连接，是否显示IPV6二维码?${Font}\c"
    read -p "(Y/N): " key
    case $key in
        Y)
        ipv6_QRcode $i
        ;;
        y)
        ipv6_QRcode $i
        ;;
    esac

    echo -e "${SkyBlue}:: SSH工具推荐Git-Bash 2.20; GCP_SSH(浏览器)字体Courier New 二维码正常${Font}"
}

# 显示IPV6手机客户端二维码
ipv6_QRcode(){
    if [[ $# > 0 ]]; then
        i="$1"
    fi
    get_serverip
    serveripv6=$(curl -6 ip.sb)
    if [[ -z $serveripv6 ]]; then
        echo -e "${Red}:: 获取IPV6地址不正确，你的服务器可能没有IPV6网络支持!${Font}"
    else
        cat /etc/wireguard/wg_${host}_$i.conf | sed "s/${serverip}/[${serveripv6}]/g" | qrencode -o - -t UTF8
        echo -e "${Green}:: IPV6地址: [${serveripv6}] 请确认服务器和本地网络支持IPV6!${Font}"
    fi
}

get_serverip(){
    if [ ! -e '/var/ip_addr' ]; then
       echo -n $(curl -4 ip.sb) > /var/ip_addr
    fi
    serverip=$(cat /var/ip_addr)
    ipv6_range="fd08:620c:4df0:65eb::"
}

# 重置 WireGuard 客户端配置和数量
wg_clients(){
    echo -e "${Red}:: 注意原来的客户端配置都会删除，按 Ctrl+ C 可以紧急撤销  ${Font}"

    # 转到wg配置文件目录
    cd /etc/wireguard
    cp wg0.conf  conf.wg0.bak

    echo -e "${SkyBlue}:: 输入客户端Peer总数${Font}\c"
    read -p "(2--200): " num_x

    if [[ ${num_x} -ge 2 ]] && [[ ${num_x} -le 200 ]]; then
     wg_num=OK
    else
      num_x=3
    fi

    # 服务器 IP 和 端口
    port=$(wg show wg0 listen-port) && host=$(hostname -s)
    get_serverip

    # 删除原配置，让IP和ID号对应; 保留原来服务器的端口等配置
    rm  /etc/wireguard/wg_${host}_*   >/dev/null 2>&1
    line_num=$(cat -n wg0.conf | grep 'AllowedIPs'  | head -n 1 | awk '{print $1}')
    head -n ${line_num}  conf.wg0.bak > wg0.conf

    # 重启wg服务器
    wg-quick down wg0  >/dev/null 2>&1
    wg-quick up wg0    >/dev/null 2>&1

    # 重新生成用户配置数量
    for i in `seq 2 200`
    do
        ip=10.0.0.${i}
        ip6=${ipv6_range}${i}
        wg genkey | tee cprivatekey | wg pubkey > cpublickey
        wg set wg0 peer $(cat cpublickey) allowed-ips "${ip}/32, ${ip6}"

        cat <<EOF >wg_${host}_$i.conf
[Interface]
PrivateKey = $(cat cprivatekey)
Address = $ip/24, $ip6/64
DNS = 8.8.8.8, 2001:4860:4860::8888

[Peer]
PublicKey = $(wg show wg0 public-key)
Endpoint = $serverip:$port
AllowedIPs = 0.0.0.0/0, ::0/0
PersistentKeepalive = 25

EOF
        cat wg_${host}_$i.conf | qrencode -o wg_${host}_$i.png
        if [ $i -ge $num_x ]; then break; fi
    done

    wg-quick save wg0
    clear && display_peer
    cat /etc/wireguard/wg_${host}_2.conf
    echo -e "${SkyBlue}:: 使用${GreenBG} bash wg5 ${SkyBlue}命令,可以临时网页下载配置和二维码${Font}"
}

# 安装 WireGuard+Speeder+Udp2Raw 和 SS+Kcp+Udp2RAW 配置
ss_kcp_udp2raw_wg_speed(){
    # 下载/编译 shadowsocks-libev
    wget -qO- git.io/fhExJ | bash

    wget -O ~/ss_wg_set_raw  git.io/fpKnF    >/dev/null 2>&1
    bash ~/ss_wg_set_raw
    rm ~/ss_wg_set_raw
}

# 常用工具和配置
get_tools_conf(){
    apt install -y htop tmux curl wget vim psmisc bash-completion  ca-certificates locales
 #  yum install -y vim htop tmux screen iperf3  >/dev/null 2>&1
    wget -O .vimrc      --no-check-certificate https://raw.githubusercontent.com/hongwenjun/srgb/master/vim/_vimrc
    wget -O .bashrc     --no-check-certificate https://raw.githubusercontent.com/hongwenjun/srgb/master/vim/_bashrc
    wget -O .tmux.conf  --no-check-certificate https://raw.githubusercontent.com/hongwenjun/tmux_for_windows/master/.tmux.conf
}

# 慎用 authorized_keys
authorized_keys(){
mkdir -p ~/.ssh  && cd ~/.ssh
cat <<EOF >>  authorized_keys
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDm5IXhVxCp317F3X+VEKmLPNiIGigbX4eot3EPIizbHHVURVOEXbxlN5tqQPmFt62qex4GhXmOfcMmLcaDwrkci7A3dPlnjRukYBDK3jQtzjVexTvNqcblTKj2aEpZg5Z8Z5vCOVrOfCdXOngqi/NkItvsid2DLzqi7KTpdFpgZGSwpV2h3E3U0N18uBLQwDj3ag2mUT7X2kx4t4DYbQDWyGt+bbivnTHV0k/BZJPwqnPD2tpyH19lKWvL3fm3gjoMkTtxDzEXHpTmTe95Z1AKzOfY1reEZ+dHAWy0wHmCA1by1XJtagoeTVqa+IS1wfOimwJE/oIofhDjSNjsMk63 root
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDB1yzgEUtS0t5GUW2lVeZpWEn6YDI8x3nIMzjQscIL3Z9QDvyONohC58t6kHQtgj7+/5pQnzaPOz0qFuDolqQOp9D8tiUJIEYHc8PA7WGxRKwS7L2j0ia7FleGAKyhi9tR6TqY4T9Vny9g8VetRBzaMz+WAv8FHYDLfQq+Wcrx1GJgYiiNp0UWEMWrY50K1vub6rtk7xNUhiDGlfEsLxgKTaDUwQ/sEcyu/ZTEIlaaSPLsIuaWKJvIrnicmYIP7jZ3S4k7De/UZo87EXo6PQGhyJCDBYWXPd0Ng7XavXbm8MoRb5+Go9zn04f8oBHuqLJhSyrLFIFhPmEogKvpJ/Xd  vip@cloudshell
EOF
}

# 主菜单输入数字 88      # 隐藏功能:从源VPS克隆服务端配置，获得常用工具和配置
scp_conf(){
    echo -e "${RedBG}:: 警告: 警告: 警告:${Yellow} VPS服务器已经被GFW防火墙关照，按 Ctrl+ C 可以紧急逃离！  ${Font}"
#    echo_SkyBlue  ":: 隐藏功能: 从源VPS克隆服务端配置，共用客户端配置"
#    read -p ":: 请输入源VPS的IP地址(域名):"  vps_ip
#    cmd="scp root@${vps_ip}:/etc/wireguard/*  /etc/wireguard/. "
#    echo -e "${GreenBG}#  ${cmd}  ${Font}   现在运行scp命令，按提示输入yes，源vps的root密码"
#    ${cmd}

#    wg-quick down wg0   >/dev/null 2>&1
#    wg-quick up wg0     >/dev/null 2>&1
#    echo -e "${RedBG}    我真不知道WG服务器端是否已经使用源vps的配置启动!    ${Font}"

    get_tools_conf
    authorized_keys
}

# DEBIAN LOCALE LANGUAGE SETTINGS
en_US()
{
	cat <<EOF >/etc/default/locale
LANG=en_US.UTF-8
EOF
	echo -e "Please log in again on Debian tty1"
}

zh_CN()
{
	cat <<EOF >/etc/default/locale
# 中文显示
LANG="zh_CN.UTF-8"
LANGUAGE="zh_CN:zh"
EOF

	echo -e ":: 仅支持本身中文系统切换回中文!"
	echo -e "Please log in again on Debian tty1"
}

ipinfo(){

    echo_GreenBG ":: 统计自己电信服务商IP动态变化 ::"
    echo -e "${Green}"
# 应用: 统计自己电信服务商IP动态变化
cat /var/log/udp2raw.log \
  | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}' | sort | uniq -c| sort -nrk 1


    echo -e
    echo_RedBG ":: 抠脚大叔在窥视你的小鸡 ::"
    echo -e "${Red}"
# 统计哪些IP在扫描你的vps
cat /var/log/auth.log \
  | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}' | sort | uniq -c| sort -nrk 1

    echo -e
    echo_GreenBG  ":: 查询IP信息和物理地址 https://www.ipip.net/ipquery.html"
    echo -e
    echo_Yellow  ":: 当前${RedBG} 服务器IP: ${Yellow} $(cat /var/ip_addr) ${Font} ::"
}

# 创建容器: qbittorrent
docker_qb(){
    docker run --name=qbittorrent \
    -e PUID=1000 -e PGID=1000 \
    -e TZ=Asia/ShangHai \
    -e UMASK_SET=022 -e \
    WEBUI_PORT=8080 \
    -p 59902:59902 \
    -p 59902:59902/udp \
    -p 8080:8080 \
    -v /mnt/config:/config \
    -v /mnt/downloads:/downloads \
    --restart unless-stopped \
    -d linuxserver/qbittorrent

    #  浏览器中输入网址管理
    echo -e    http://$(curl -4 ip.sb):8080
    echo -e "${GreenBG}:: qbittorrent 网页管理地址和密码   ${Yellow}"
    echo -e "${SkyBlue}:: 默认用户名  ${RedBG} admin ${SkyBlue} 密码  ${RedBG} adminadmin ${Font} "
    echo -e ":: 请登陆配置Peer端口(59902)和密码, 重启命令: ${GreenBG} docker restart qbittorrent ${Font}"
}

# 安装tcping
tcping_instll(){
	wget https://github.com/cloverstd/tcping/releases/download/v0.1.1/tcping-linux-amd64-v0.1.1.tar.gz
	tar xf tcping-linux-amd64-v0.1.1.tar.gz
	mv tcping /usr/bin/tcping
	tcping 1.1.1.1 53
	rm tcping-linux-amd64-v0.1.1.tar.gz
}

# 定义文字颜色
Green="\033[32m"  && Red="\033[31m" && GreenBG="\033[42;37m" && RedBG="\033[41;37m"
Font="\033[0m"  && Yellow="\033[0;33m" && SkyBlue="\033[0;36m"

echo_SkyBlue(){
    echo -e "${SkyBlue}$1${Font}"
}
echo_Yellow(){
    echo -e "${Yellow}$1${Font}"
}
echo_GreenBG(){
    echo -e "${GreenBG}$1${Font}"
}
echo_RedBG(){
    echo -e "${RedBG}$1${Font}"
}

#  Vps_Setup 一键脚本 藏经阁
onekey_plus(){
    echo_RedBG   "           一键安装设置全家桶    by 蘭雅sRGB             "
    echo_GreenBG "    开源项目：https://github.com/hongwenjun/vps_setup    "

    echo_SkyBlue "  # 一键安装 WireGuard Shadowsocks V2Ray 服务端三合一脚本"
    echo_Yellow  "  bash <(curl -L -s https://git.io/vps.sh)"
    echo_SkyBlue "  # 下载 IPTABLES 设置防火墙规则 脚本 By 蘭雅sRGB"
    echo_Yellow  "  wget -qO safe_iptables.sh git.io/fhUSe && bash safe_iptables.sh"
    echo_SkyBlue "  # Google Cloud Platform GCP实例开启密码与root用户登陆"
    echo_Yellow  "  wget -qO- git.io/fpQWf | bash"
    echo_SkyBlue "  # 一键安装 vnstat 流量检测   by 蘭雅sRGB"
    echo_Yellow  "  bash <(curl -L -s https://git.io/fxxlb) setup"
    echo_SkyBlue "  # 一键安装wireguard 脚本 For Debian_9 Ubuntu Centos_7"
    echo_Yellow  "  wget -qO- git.io/fptwc | bash"
    echo_SkyBlue "  # 一键安装 SS+Kcp+Udp2Raw 脚本 快速安装 for Debian 9"
    echo_Yellow  "  wget -qO- git.io/fpZIW | bash"
    echo_SkyBlue "  # 一键安装 SS+Kcp+Udp2Raw 脚本 for Debian 9  Ubuntu (编译安装)"
    echo_Yellow  "  wget -qO- git.io/fx6UQ | bash"
    echo_SkyBlue "  # Telegram 代理 MTProxy Go版 一键脚本(源:逗比网)"
    echo_Yellow  "  wget -qO mtproxy_go.sh  git.io/fpWo4 && bash mtproxy_go.sh"
    echo_SkyBlue "  # linux下golang环境搭建自动脚本  by 蘭雅sRGB"
    echo_Yellow  "  wget -qO- https://git.io/fp4jf | bash"
    echo_SkyBlue "  # SuperBench.sh 一键测试服务器的基本参数"
    echo_Yellow  "  wget -qO- git.io/superbench.sh | bash"
    echo_SkyBlue "  # 使用BestTrace查看VPS的去程和回程"
    echo_Yellow  "  wget -qO- git.io/fp5lf | bash"
    echo_SkyBlue "  # 挂载GD网盘 安装rclone官方脚本"
    echo_Yellow  "  curl https://rclone.org/install.sh | sudo bash"
    echo_SkyBlue "  # 安装Docker软件一键脚本"
    echo_Yellow  "  curl -fsSLo- get.docker.com | /bin/sh"
    echo_SkyBlue "  # 另一个Linux服务器基准脚本"
    echo_Yellow  "  curl -sL yabs.sh | bash"
}

safe_iptables(){
   # IPTABLES 设置防火墙规则 脚本 By 蘭雅sRGB  特别感谢 TaterLi 指导
   wget -qO safe_iptables.sh git.io/fhUSe && bash safe_iptables.sh
}

# 更新wgmtu脚本
update_self(){
    # 安装 bash wgmtu 脚本用来设置服务器
    wget -O ~/wgmtu  https://git.io/wgmtu >/dev/null 2>&1
}

# 更新 WireGuard
wireguard_update(){
    yum update -y wireguard-dkms wireguard-tools     >/dev/null 2>&1
    apt update -y wireguard-dkms wireguard-tools     >/dev/null 2>&1
    echo -e "${RedBG}   更新完成  ${Font}"
}
# 卸载 WireGuard
wireguard_remove(){
    wg-quick down wg0
    yum remove -y wireguard-dkms wireguard-tools     >/dev/null 2>&1
    apt remove -y wireguard-dkms wireguard-tools     >/dev/null 2>&1
    rm -rf /etc/wireguard/
    echo -e "${RedBG}   卸载完成  ${Font}"
}

# 更新/安装  UDP2RAW   KCPTUN   UDPspeeder 工具
udp2raw_update()
{
	systemctl stop rc-local

    # 下载 UDP2RAW
    udp2raw_ver=$(wget --no-check-certificate -qO- https://api.github.com/repos/wangyu-/udp2raw-tunnel/releases/latest | grep 'tag_name' | cut -d\" -f4)
    wget https://github.com/wangyu-/udp2raw-tunnel/releases/download/${udp2raw_ver}/udp2raw_binaries.tar.gz
    tar xf udp2raw_binaries.tar.gz
    mv udp2raw_amd64 /usr/bin/udp2raw
    rm udp2raw* -rf
    rm version.txt

    # 下载 KCPTUN
    kcp_ver=$(wget --no-check-certificate -qO- https://api.github.com/repos/xtaci/kcptun/releases/latest | grep 'tag_name' | cut -d\" -f4)
    kcp_gz_ver=${kcp_ver:1:8}

    kcptun_tar_gz=kcptun-linux-amd64-${kcp_gz_ver}.tar.gz
    wget https://github.com/xtaci/kcptun/releases/download/${kcp_ver}/$kcptun_tar_gz
    tar xf $kcptun_tar_gz
    mv server_linux_amd64 /usr/bin/kcp-server
    rm $kcptun_tar_gz
    rm client_linux_amd64

    # 下载 UDPspeeder
    udpspeeder_ver=$(wget --no-check-certificate -qO- https://api.github.com/repos/wangyu-/UDPspeeder/releases/latest | grep 'tag_name' | cut -d\" -f4)
    wget https://github.com/wangyu-/UDPspeeder/releases/download/${udpspeeder_ver}/speederv2_binaries.tar.gz
    tar xf speederv2_binaries.tar.gz
    mv speederv2_amd64 /usr/bin/speederv2
    rm speederv2* -rf
    rm version.txt

    systemctl restart rc-local
    ps aux | grep -e kcp -e udp -e speed -e ss-server
    ss-server -h | head -2  && kcp-server -v && udp2raw -h | head -2 && speederv2 -h | head -2

}

rc-local_remove(){
   echo -e "${RedBG}   卸载Udp2Raw套接服务配置 /etc/rc.local ${Font}"
   systemctl stop rc-local
   rm /usr/bin/udp2raw  /usr/bin/kcp-server  /usr/bin/speederv2
   ps aux | grep -e kcp -e udp -e speed
   mv  /etc/rc.local  ~/rc.local
   echo -e "${RedBG}   卸载完成，备份在 /root/rc.local  ${Font}"
}

update_remove_menu(){
    echo -e "${RedBG}   更新/卸载 WireGuard服务端和Udp2Raw   ${Font}"
    echo -e "${Green}>  1. 更新 WireGuard 服务端"
    echo -e ">  2. 卸载 WireGuard 服务端"
    echo -e ">  3. 更新 Udp2Raw KCPTUN UDPspeeder 软件"
    echo -e ">  4. 卸载 Udp2Raw KCPTUN UDPspeeder 服务套件"
    echo -e ">  5. 退出${Font}"
    echo
    read -p "请输入数字(1-5):" num_x
    case "$num_x" in
        1)
        wireguard_update
        ;;
        2)
        wireguard_remove
        ;;
	    3)
        udp2raw_update
        ;;
        4)
        rc-local_remove
        ;;
        5)
        exit 1
        ;;
        *)
        ;;
        esac
}

# 删除末尾的Peer
del_last_peer(){
    peer_key=$(wg show wg0 allowed-ips  | tail -1 | awk '{print $1}')
    wg set wg0 peer $peer_key remove
    wg-quick save wg0
    echo -e "${SkyBlue}:: 删除客户端 peer: ${Yellow} ${peer_key} ${SkyBlue} 完成.${Font}"
}

# 显示激活Peer表
display_peer(){
    # peer和ip表写临时文件
    wg show wg0 allowed-ips > /tmp/peer_list

    # 显示 peer和ip表
    echo -e  "${RedBG} ID ${GreenBG}         Peer:  <base64 public key>         ${SkyBlue}  IP_Addr:  ${Font}"
    i=1
    while read -r line || [[ -n $line ]]; do
        peer=$(echo $line | awk '{print $1}')
        ip=$(echo $line | awk '{print $2}')
        line="> ${Red}${i}   ${Yellow}${peer}${Font}   ${ip}"
        echo -e $line  &&  let i++
    done < /tmp/peer_list
}

# 选择删除Peer客户端
del_peer(){
    display_peer
    echo
    echo -e "${RedBG}请选择 IP_Addr 对应 ID 号码，指定客户端配置将删除! ${Font}"
    read -p "请输入ID号数字(1-X):" x

    peer_cnt=$(cat /tmp/peer_list | wc -l)
    if [[ ${x} -ge 1 ]] && [[ ${x} -le ${peer_cnt} ]]; then
        i=$x
        peer_key=$(cat /tmp/peer_list | head -n $i | tail -1 | awk '{print $1}')
        wg set wg0 peer $peer_key remove
        wg-quick save wg0
        echo -e "${SkyBlue}:: 删除客户端 peer: ${Yellow} ${peer_key} ${SkyBlue} 完成.${Font}"
    else
        echo -e "${SkyBlue}:: 命令使用: ${GreenBG} wg set wg0 peer <base64 public key> remove ${Font}"
    fi
    rm /tmp/peer_list
}

# 添加新的客户端peer
add_peer(){

    # 服务器 IP 端口 ，新客户端 序号和IP
    port=$(wg show wg0 listen-port)
    get_serverip && host=$(hostname -s) && cd /etc/wireguard
    wg genkey | tee cprivatekey | wg pubkey > cpublickey

    ipnum=$(wg show wg0 allowed-ips  | tail -1 | awk '{print $2}' | awk -F '[./]' '{print $4}')
    i=$((10#${ipnum}+1))  &&  ip=10.0.0.${i}  ip6=${ipv6_range}${i}

    # 生成客户端配置文件
    cat <<EOF >wg_${host}_$i.conf
[Interface]
PrivateKey = $(cat cprivatekey)
Address = $ip/24, $ip6/64
DNS = 8.8.8.8, 2001:4860:4860::8888

[Peer]
PublicKey = $(wg show wg0 public-key)
Endpoint = $serverip:$port
AllowedIPs = 0.0.0.0/0, ::0/0
PersistentKeepalive = 25
EOF

    # 在wg服务器中生效客户端peer
    wg set wg0 peer $(cat cpublickey) allowed-ips "${ip}/32, ${ip6}"
    wg-quick save wg0

    # 显示客户端
    cat /etc/wireguard/wg_${host}_$i.conf | qrencode -o wg_${host}_$i.png
    cat /etc/wireguard/wg_${host}_$i.conf | qrencode -o - -t UTF8
    echo -e "${SkyBlue}:: 新客户端peer添加完成; 文件:${Yellow} /etc/wireguard/wg_${host}_$i.conf ${Font}"
    cat /etc/wireguard/wg_${host}_$i.conf
}

wg_clients_menu(){
    echo -e "${RedBG}   添加/删除 WireGuard Peer 客户端管理  ${Font}"
    echo -e "${Green}>  1. 添加一个 WireGuard Peer 客户端配置"
    echo -e ">  2. 删除末尾 WireGuard Peer 客户端配置"
    echo -e ">  3. 指定删除 WireGuard Peer 客户端配置"
    echo    "------------------------------------------------------"
    echo -e "${SkyBlue}>  4. 退出"
    echo -e ">  5.${RedBG} 重置 WireGuard 客户端 Peer 数量 ${Font}"
    echo
    read -p "请输入数字(1-5):" num_x
    case "$num_x" in
        1)
        add_peer
        ;;
        2)
        del_last_peer
        ;;
        3)
        del_peer
        ;;
        4)
        display_peer
        exit 1
        ;;
        5)
        wg_clients
        ;;
        *)

        ;;
        esac
}


# 设置菜单
start_menu(){
    clear
    echo -e "${RedBG}   一键安装 WireGuard 脚本 For Debian_9 Ubuntu Centos_7   ${Font}"
    echo -e "${GreenBG}     开源项目: https://github.com/hongwenjun/vps_setup    ${Font}"
    echo -e "${Green}>  1. 显示客户端配置和二维码 (手机支持纯IPV6,稳定性有待测试)"
    echo -e ">  2. 修改 WireGuard 服务器端 MTU 值"
    echo -e ">  3. 修改 WireGuard 端口号"
    echo -e ">  4. 安装 WireGuard+Speeder+Udp2Raw 和 SS+Kcp+Udp2RAW 一键脚本"
    echo    "----------------------------------------------------------"
    echo -e "${SkyBlue}>  5. 添加/删除 WireGuard Peer 客户端管理"
    echo -e ">  6. 更新/卸载 WireGuard服务端和Udp2Raw"
    echo -e ">  7. Replace the Script itself with Simplified Chinese to English"
    echo -e ">  8. ${RedBG}  IPTABLES 防火墙设置脚本  ${Font}"
    echo
    echo_SkyBlue  "Usage: ${GreenBG} bash wgmtu ${SkyBlue} [ setup | remove | vps | bench | -U ] "
    echo_SkyBlue                      "                    [ v2ray | vnstat | log | trace | -h ] "
    echo_SkyBlue                      "                    [ tr|qb | docker |rclone|ip|en|yabs ] "
    echo
    read -p "请输入数字(1-8):" num
    case "$num" in
        1)
        conf_QRcode
        ;;
        2)
        setmtu
        ;;
        3)
        setport
        ;;
        4)
        ss_kcp_udp2raw_wg_speed
        ;;
        5)
        wg_clients_menu
        ;;
        6)
        update_remove_menu
        update_self
        exit 1
        ;;
        7)
        wget -O ~/wgmtu  https://raw.githubusercontent.com/hongwenjun/vps_setup/english/wgmtu.sh
        bash wgmtu
        exit 1
        ;;
        777)
        # Vps_Setup 一键脚本 藏经阁
        onekey_plus
        ;;
        8)
        safe_iptables
        ;;
        ip)
        ipinfo
        ;;
        tr)
        # Debian 安装 Transmission 一键脚本
        wget https://raw.githubusercontent.com/hongwenjun/vps_setup/master/rclone/transmission.sh
        bash transmission.sh
        ;;
        qb)
        docker_qb
        ;;
        tcping)
        tcping_instll
        ;;
    # 菜单输入 管理命令 bash wgmtu 命令行参数
        setup)
        ss_kcp_udp2raw_wg_speed
        ;;
        remove)
        wireguard_remove
        rc-local_remove
        ;;
        88)
        scp_conf
        ;;
        9999)
        bash <(curl -L -s https://git.io/fpnQt) 9999
        ;;
        -U)
        update_self
        ;;
        -h)
        wgmtu_help
        ;;
        vps)
        bash <(curl -L -s https://git.io/vps.sh)
        ;;
        docker)
        curl -fsSLo- get.docker.com | /bin/sh
        ;;
        rclone)
        curl https://rclone.org/install.sh | bash
        ;;
        en)
        en_US
        ;;
        cn)
        zh_CN
        ;;
        vnstat)
        bash <(curl -L -s https://git.io/fxxlb) setup
        ;;
        bench)
        wget -qO- git.io/superbench.sh | bash
        ;;
	yabs)
        curl -sL yabs.sh | bash
        ;;
        trace)
        wget -qO- git.io/fp5lf | bash
        ;;
        v2ray)
        bash <(curl -L -s https://git.io/v2ray.ss)
        ;;
        log)
        cat vps_setup.log
        ;;

        *)
        display_peer
        ;;
        esac
}

wgmtu_help(){
    echo_SkyBlue  "Usage: ${GreenBG} bash wgmtu ${SkyBlue} [ setup | remove | vps | bench | -U ] "
    echo_SkyBlue                      "                    [ v2ray | vnstat | log | trace | -h ] "
    echo_SkyBlue                      "                    [ tr|qb | docker |rclone|ip|en|yabs ] "
    echo
    echo_Yellow "[setup 惊喜 | remove 卸载 | vps 脚本 | bench 基准测试 | -U 更新]"
    echo_Yellow "[v2ray 你懂 | vnstat 流量 | log 信息 | trace 网络回程 | -h 帮助]"
}

# WireGuard 管理命令 bash wgmtu 命令行参数
if [[ $# > 0 ]]; then
    key="$1"
    case $key in
        setup)
        ss_kcp_udp2raw_wg_speed
        ;;
        remove)
        wireguard_remove
        rc-local_remove
        ;;
        88)
        scp_conf
        ;;
        9999)
        bash <(curl -L -s https://git.io/fpnQt) 9999
        ;;
        -U)
        update_self
        ;;
        -h)
        wgmtu_help
        ;;
        vps)
        bash <(curl -L -s https://git.io/vps.sh)
        ;;
        ip)
        ipinfo
        ;;
        tr)
        # Debian 安装 Transmission 一键脚本
        wget https://raw.githubusercontent.com/hongwenjun/vps_setup/master/rclone/transmission.sh
        bash transmission.sh
        ;;
        qb)
        docker_qb
        ;;
        docker)
        curl -fsSLo- get.docker.com | /bin/sh
        ;;
	tcping)
        tcping_instll
        ;;
        rclone)
        curl https://rclone.org/install.sh | bash
        ;;
        en)
        en_US
        ;;
        cn)
        zh_CN
        ;;
        vnstat)
        bash <(curl -L -s https://git.io/fxxlb) setup
        ;;
        bench)
        wget -qO- git.io/superbench.sh | bash
        ;;
        trace)
        wget -qO- git.io/fp5lf | bash
        ;;
        v2ray)
        bash <(curl -L -s https://git.io/v2ray.ss)
        ;;
        log)
        cat vps_setup.log
        ;;
    esac
else
	start_menu
fi